background image

Sierra Wireless Mobile Hotspot User Guide

20

 4112754

2.

Click 

Wi-Fi

.

3.

Click 

WPS

 for either the Main Wi-Fi or Guest Wi-Fi.

4.

Choose the WPS method you want to use:

·

If the device you want to connect has a WPS button:

Click 

WPS button pairing

, and then within two minutes (120 seconds) 

press the device’s WPS button, or

·

If the device you want to connect has a WPS PIN associated with it:

Click 

Enter WPS PIN

, and then enter the device’s WPS PIN.

Your mobile hotspot and the wireless device will communicate and establish 
the connection.

Disable / enable Wi-Fi (Main and Guest)

The Wi-Fi networks (Main and Guest) can be disabled or enabled from the Unite 
Manager homepage and from the LCD.

Note:  If you disable or enable either Wi-Fi network, the Wi-Fi radio resets and all devices 
connected to the hotspot on both networks (including the device you are using unless you 
are in tethered mode) will lose their connection.

On the LCD touchscreen:

To disable or enable your Main Wi-Fi network:

1.

From the home screen, tap 

Wi-Fi > Wi-Fi Info

.

Summary of Contents for AirCard 770S











































































Reviews: