Sierra Wireless AirBooster 350 User Manual Download Page 3

WARNING - For FCC compliance only a tested and approved
antenna should be used in conjunction with RG58 cable of at
least 4.5m (14'9") in length. As of this writing the following
antennas have been tested and approved:

Larsen

 model MM3800FME

●   

Antenna World

 model CLR-877

●   

Sierra Wireless continues to test other makes and models of
antennas. For the most current list, consult 

our website

.

Regulatory Information

The equipment certifications appropriate to your device are marked on the
device and the accompanying product specific information. Where
appropriate, the use of the equipment is subject to the following conditions:

CAUTION - Unauthorized modifications or changes not
expressly approved by Sierra Wireless, Inc. could void
compliance with regulatory rules, and thereby your authority to
use this equipment.

WARNING (EMI) - United States FCC Information - This
equipment has been tested and found to comply with the limits
pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in
an appropriate installation. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful
interference to radio communication. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:

Reorient or relocate the receiving antenna

●   

Increase the separation between the equipment and
receiver

●   

Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected

●   

Consult the dealer or an experienced radio/TV technician
for help

●   

WARNING (EMI) - Canada - This digital apparatus does not
exceed the Class A limits for radio noise emissions from digital
apparatus as set out in the interference causing equipment
standard entitled "Digital Apparatus", ICES-003 of the
Department of Communications.

Cet appareil numérique respecte les limites de bruits
radioélectriques applicables aux appareils numériques de
Classe A prescrites dans la norme sur le matériel brouilleur:
"Appareils Numériques", NMB-003 édictée par le ministre des
Communications.

 

Patents and Trademarks

Summary of Contents for AirBooster 350
















Reviews: