background image

ACM Installation and Operations Guide

Rev 3  Nov 17

2

4119855

Important 
Notice

Due to the nature of wireless communications, transmission and reception of data 
can never be guaranteed. Data may be delayed, corrupted (i.e., have errors) or be 
totally lost. Although significant delays or losses of data are rare when wireless 
devices such as the Sierra Wireless modem are used in a normal manner with a 
well-constructed network, the Sierra Wireless modem should not be used in 
situations where failure to transmit or receive data could result in damage of any 
kind to the user or any other party, including but not limited to personal injury, 
death, or loss of property. Sierra Wireless accepts no responsibility for damages 
of any kind resulting from delays or errors in data transmitted or received using 
the Sierra Wireless modem, or for failure of the Sierra Wireless modem to 
transmit or receive such data.

Limitation of 
Liability

The information in this manual is subject to change without notice and does not 
represent a commitment on the part of Sierra Wireless. SIERRA WIRELESS AND 
ITS AFFILIATES SPECIFICALLY DISCLAIM LIABILITY FOR ANY AND ALL 
DIRECT, INDIRECT, SPECIAL, GENERAL, INCIDENTAL, CONSEQUENTIAL, 
PUNITIVE OR EXEMPLARY DAMAGES INCLUDING, BUT NOT LIMITED TO, 
LOSS OF PROFITS OR REVENUE OR ANTICIPATED PROFITS OR REVENUE 
ARISING OUT OF THE USE OR INABILITY TO USE ANY SIERRA WIRELESS 
PRODUCT, EVEN IF SIERRA WIRELESS AND/OR ITS AFFILIATES HAS BEEN 
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR THEY ARE 
FORESEEABLE OR FOR CLAIMS BY ANY THIRD PARTY.

Notwithstanding the foregoing, in no event shall Sierra Wireless and/or its 
affiliates aggregate liability arising under or in connection with the Sierra Wireless 
product, regardless of the number of events, occurrences, or claims giving rise to 
liability, be in excess of the price paid by the purchaser for the Sierra Wireless 
product.

Patents

This product may contain technology developed by or for Sierra Wireless Inc. This 
product includes technology licensed from QUALCOMM

®

. This product is 

manufactured or sold by Sierra Wireless Inc. or its affiliates under one or more 
patents licensed from MMP Portfolio Licensing.

Copyright

© 2017 Sierra Wireless. All rights reserved.

Trademarks

Sierra Wireless

®

, AirPrime

®

, AirLink

®

, AirVantage

®

 and the Sierra Wireless logo 

are registered trademarks of Sierra Wireless. 

Windows

®

 and Windows Vista

®

 are registered trademarks of Microsoft 

Corporation.

QUALCOMM

®

 is a registered trademark of QUALCOMM Incorporated. Used 

under license.

Other trademarks are the property of their respective owners.

Summary of Contents for ACM






















































Reviews: