Sierra Video Viper Component Series, User Manual

Page: 18 / 90

SIERRA VIDEO
12
To set sync input terminations, type in the command(s) below for the type of change you want to
make;
Global change (all sync boards, all sync levels, all sync inputs) to input termination of 75 ohm;
**G XFER_ASCII,253,0,0,0F10FF52~!!
**G XFER_ASCII,253,0,0,0F10FF730401FF~!!
Global change to sync input termination of 510 ohm;
**G XFER_ASCII,253,0,0,0F10FF52~!!
**G XFER_ASCII,253,0,0,0F10FF73040100~!!
Per Board- Per Level All inputs, termination of 75 ohm;
**G XFER_ASCII,253,0,0,0F10FF52~!!
**G XFER_ASCII,253,0,0,(Level)10(Board Address)730401FF~!!
Per Board- Per Level, sync input termination to 510 ohm;
**G XFER_ASCII,253,0,0,0F10FF52~!!
**G XFER_ASCII,253,0,0,(Level)10(Board Address)73040100~!!
Note:
Board inputs are in groups of eight.
Level Numbers;
Level 1= 0
Level 2= 1
Level 3= 2
Level 4= 3
Level 5= 4