Technical Structure and Port Description
Note:
Remark: Internal Precision
Component, for avoiding device
damage please handles with case,
avoiding violent vibration. Please
contact us or local agency if
damage or component loss by
shipping.
Indicator:
Support power source, network
connection, Fiber port/RJ45 port
working status indication, It is
convenient for engineer to parsing
problem and monitoring working
status.
Connection Diagram
Power Port:
Power port
connect with PS
U
, internal
power supply intelligent
network management PoE
switch are without PS
U
,
connecting with
AC100-240V,50/60Hz directly.
Ethernet Port:
Beside PoE port, other ports are
Ethernet RJ45 port, and all RJ45 port
support Auto MDIMDIX, plug and
play
lnstallation guide
Please install with the supporting
devices.
lnstallation
Please confirm the following things
befare installation:
Connect to RJ45 port
1.Connect one end of RJ45 wire to
switch, the other end to other
equipment, as shown as the figure
on the right.
2. After power on, please check the
LED indictor status. If it is on, it
shows the link is O
K
, otherwise, the
link is down. Then please check the
link and make sure the other
equipment is turned on, refer to the
instruction on above page for
details.
Connect to power
SWT 1016 Smart managed PoE switch
adopts AC 100-240V, 50/60Hz.
1. Please check the power supply
specification matches with the
required.
2. Connect switch power wire to AC
power socket.
After installation, please check:
If there is enough space for heat sink; if
the power socket is suitable for switch
specification; if the power, switch and
rack are
properly grounded and if the
connection between switch and other
network equipments are normal.
Note:
Please do not put heavy
products on the POE switch, and
please ensure good ventilation
environment far the POE
switch.Please cut off the power first
befare plugging the power adapter.
Note:
lf initialization is inconsistent
with the above, please check the
power.
Model description with details.
SWTl 016: 16-port 10/12-
port 10/100/1000Mbps up-link
Ethernet port switch , No. 1-16
ports support POE , IEEE802.3af/at,
POE port output : 15.4watts , total
power : 200watts.
