Siensor AF107, Passport Manual

Page: 17 / 56

17
Fig. 5.7 Installing a protective seal on the liquid level sensor
3. Connect the wire ends and fasten them by the seal.
5.3.2 installing a protective sealing on the
Connector
1. Pass the sealing wire through the holes in the
retainer screw as shown in the figure (see Fig. 5.8).
Fig. 5.8 Installing a protective sealing on the connector
5.3 sealinG
5.3.1 installing a protective seal on the liquid
level sensor
1. Fasten the retainer screw (see 1 in Fig. 5.7).
2. Pass the sealing wire through the holes in the
retainer screw and the sensor housing as shown in
the figure (see Fig. 5.7).
1