
XT55 AVL User’s Guide
Confidential/Released
s
m
o
b
i
l
e
XT55_avl_ug_V03
Page 24 of 37
28.06.2004
Commands build in the history function
$PSRF112,
1,
LOG=[parameter
s],
*XX
Parameter description:
1:
// enable history function
Parameters: //
configure history function
Defined values
numSat
// Minimum number of satellites required for storage in
the GPS history.
MinTime
// Minimum time interval for saving GPS protocols in the
GPS
history
MaxTime
// Maximum time interval for saving GPS protocols in the
GPS
history
MinDist
// Minimum covered distance for saving GPS protocols in
the GPS history
MaxDist
// Maximum covered distance for saving GPS protocols in
the GPS history
MinSpeed
// Minimum driving speed for saving GPS protocols in
the GPS history
MaxSpeed
// Maximum driving speed for saving GPS protocols in
the GPS history
*XX
// C
heckSum has to be calculated.
Example 1:
$PSRF112,1,LOG=3,5,0,0,40,20,50*68
This command enables the GPS history function with entered values. Please
refer to the Chapter 3.1.1for detailed examples. The XT55 AVL stores location
data in the history memory as follows:
•
every 40 m if the vehicle has a speed less then 20km/h
•
every 5 seconds if the vehicle is driving at a speed of between 20 and 50
km/h
•
every second if the vehicle is driving faster than 50 km/h
All included settings are user-configurable parameters.
$PSRF112,
2,
*XX
Parameter description:
2:
//disables history
*XX
// C
heckSum has to be calculated.
Example 1:
$PSRF112,2*3B
This command disables the history function.
No data will be saved in the GPS
history.