20
Troubleshooting...
Troubleshooting... Cause
Solution
The dryer is not plugged
in.
Plug in the dryer.
No drying program has
been set.
Turn the program selector to
the program required.
The “on” indicator
lamp does not light
up.
The household fuse has
tripped.
Reset/replace the fuse.
Start button
M
has not
been pressed.
Press the button.
No drying program has
been set.
Select the program you
require using the program
selector.
The door is not shut.
Close the door.
The dryer does not
start.
The ambient
temperature is below
5°C.
Increase the room
temperature.
The humidity in the
room has
increased
significantly.
The room is not
sufficiently ventilated.
Ensure sufficient ventilation.
The door opens by
itself.
The locking pins are not
engaged.
Push the door closed until you
hear the locking pins click into
place.
Drying is not
satisfactory or the
drying time is too
long.
The filter is blocked.
Clean the filter (page 18).
