Home Connect
en
43
1.
Press
energy mngmt.
.
2.
Press
Connect
.
Your appliance now attempts to connect
to the smart energy system (energy
manager).If the appliance has
connected successfully,
Connected
è
appears in the display.
3.
Activate Flexstart if you want the
smart energy system (Energy
manager) to start up your appliance.
Flex Start
Activate the
Flex Start
function to allow
your smart energy system (Energy
manager) to start your appliance once
your home photovoltaic system is able
to provide sufficient energy or the
energy tariff is good.
Note:
Your smart energy system
(Energy manager) cannot start your
appliance until it is connected to the
appliance.
1.
Select the programme you require.
2.
Press
Finish In
.
3.
Select the time period you require.
Note:
The time period can be set in
1-hour increments up to 24 h.
4.
Press
Ü
Start/Pause
.
Delayed start
appears in the display.
5.
Press
Remote Start
}
.
Flex Start
appears in the display.
The
FlexStart
function has now been
activated and the appliance will wait to
be remotely started by the smart energy
system (Energy manager).
: Ready in approx.
appears in the
display. The smart energy system
(energy manager) has set a time at
which your appliance can start. The
program will end after the specified
time.
Notes
■
If the smart energy system (Energy
manager) does not start your
appliance, the programme will still
be started before the set time period
ends.
The programme will end when the
time period ends.
■
For safety reasons,
Remote Start
and in turn the
Flex Start
function
will be deactivated in the following
circumstances:
– Press
Ü
Start/Pause.
– Open the door.
– Programme end.
– Press
#
to switch off the
appliance.
– Power failure.
If the
Flex Start
function is
deactivated, the
Finish In
will remain
active.
'UXPFOHDQDGYLFH
HQHUJ\PQJPW
&RQQHFW
1RWFRQQHFWHG
6RIWZDUHXSGDWH
