Programme settings
en
25
0
Programme settings
Programme settings
Buttons
Displays
Explanations and information
Note:
Not all buttons and their functions can be selected in all programmes.
Trockenziel
(Drying aim)
ü
:
Select the dryness level depending on the required degree of
dryness.
If you have selected a dryness level, this will be stored for the
selected programme even after the appliance has been
switched off. Exception: The settings will not be saved for Cot-
tons.
Cupboard-dry plus
Ò
Multi-layered, thick laundry that does not dry readily.
Cupboard-dry
»
Normal, single-layered laundry.
Less ironing
Ø
Normal, single-layered laundry that still needs to be damp after
drying and is suitable for ironing or hanging up.
Trockengrad
(Adjust drying level)
Ô
Ô
Ô
Ô
Ô
Ô
If you think the laundry is still too damp when the drying pro-
gramme has ended, you can adjust the degree of dryness to
achieve a particular dryness level. To increase the dryness level,
set the degree of dryness to between
Ô
and
Ô
Ô
Ô
. This will
extend the programme duration but the temperature will remain
the same.
Once you have adjusted the degree of dryness for a pro-
gramme, this setting will be retained for the programme even
after the appliance has been switched off.
Fertig in (ready in)
‚
-
ƒ…
Before starting the programme
, you can preselect the pro-
gramme end time ("Ready in" time) in hourly increments (h =
hour), up to a maximum of 24 hours:
1.
Select a programme.
The programme duration will be displayed for the selected
programme, e.g.
‚
:
…†
(hours:minutes).
2.
Press
Fertig in (ready in)
repeatedly until the required
number of hours is displayed.
Note:
Use the
Fertig in (ready in)
+
button to increase
the setting values, and the
Fertig in (ready in)
–
button to
reduce them.
3.
Press
Start/Pause
Ü
.
This activates the time delay.
Before the programme starts, the selected number of
hours (e.g.
‰
) is shown on the display and counts down
until the drying programme starts. The duration of the pro-
gramme will then be displayed.
Note:
The programme duration is included in the "Ready in"
time.
