![Siemens WT47W448DN Installation And Operating Instructions Manual Download Page 22](http://html.mh-extra.com/html/siemens/wt47w448dn/wt47w448dn_installation-and-operating-instructions-manual_378838022.webp)
en
Noises
22
>
Noises
Noises
Note:
During drying, the compressor
and pump generate some noise which
is entirely normal.
The compressor in the dryer may
occasionally generate a humming
noise. The volume of this noise varies
depending on the programme and the
progress of the drying.
The compressor is ventilated from time
to time, which creates a whirring sound.
The automatic cleaning process causes
a clicking noise.
The condensation is pumped into the
condensate container using a pump.
This generates pumping noises.
D
Cleaning
Cleaning
Cleaning the dryer and the
control panel
:
Warning
Risk of death!
There is a risk of electric shock as the
dryer is operated with electricity.
Disconnect the dryer from the mains
before cleaning.
Clean the dryer using only water and a
soft, damp cloth.
Remove all detergent residue, spray
residue or other residues immediately.
Do not use cleaning agents or agents
for pre-treating laundry (e.g. prewash
sprays, stain removers). Do not use
high-pressure cleaners or steam jet
cleaners to clean your appliance.
Cleaning the moisture sensor
Note:
The dryer is equipped with a
stainless-steel moisture sensor. The
moisture sensor measures how damp
the laundry is.
After long periods of use, a fine layer of
limescale can form on the moisture
sensors. This must be removed
regularly.
Open the door and clean the moisture
sensor with a rough sponge.
Caution!
The moisture sensor may be damaged.
Do not clean the moisture sensor with
steel wool and abrasive materials.
Summary of Contents for WT47W448DN
Page 31: ...6 ...