ʑ
v
@c
@c
ʑ
v
gü
a
\
a
u
a
u
a
a
a
a
ʠ
ʠ
a
Ê
+c
|
+c
Ê
ü
+
ü
12
What to do if...
If you cannot rectify a fault yourself (e.g. switching off/on), please contact our after-sales service. We will always
find an appropriate solution and will avoid unnecessary visits by engineers. Trust the expertise of the
manufacturer and rest assured that the repair will be carried out by trained service technicians using original
spare parts. The contact details of your local after-sales service can be found in the enclosed
after-sales
service
directory, or by calling one of these numbers:
–
GB
0344 892 8999 (Calls charged at local or mobile rate.)
–
IE
01450 2655 (0.03 € per minute at peak. Off peak 0.0088 € per minute.)
When contacting the after-sales service, please quote the appliance's product number (E no.) and production
number (FD) (see the inside of the door).
Set the programme selector to
Off
and remove the appliance plug from the socket.
ʠ
The
start
indicator light
does not come on.
Mains plug plugged in?
Programme selected?
Check the socket fuse.
ʠ
The display panel light and
indicator lights
(depending on
model)
go out and the
start
indicator light flashes.
Energy-saving mode is activated
a
see the separate
Energy-saving mode
instructions.
ʠ
The
ā
symbol and
start
indicator light are flashing.
Empty the condensation container
a
Page 4.
Check the condensation outlet hose, if applicable (kink).
ʠ
The
4
symbol and
start
indicator light are flashing.
Clean the air cooler
a
Page 6 “Cleaning and care”.
Clean the fluff filter
a
Page 4
.
ʠ
The
u
symbol flashes.
Is the water tank empty?
Filling with distilled water
a
Page 9
.
The filter in the water tank may have become dirty.
If so, clean the filter in the water tank
a
Page 4
.
ʠ
The
Steam Dry - Steam
Refresh
does not start.
ʠ
Dryer does not start.
Has the
start
button been pressed? Is the door closed?
Programme set?
Ambient temperature greater than 5 °C?
ʠ
Water is leaking out.
Make sure the dryer is level.
Clean the air cooler seal.
ʠ
The door opens by itself.
Push the door closed until you hear it click into place.
ʠ
Items crease even though the
Steam Dry - Steam Refresh
programme has been
selected.
Laundry load exceeded?
Remove articles of clothing immediately after the end of the programme, hang
up and pull into shape.
Unsuitable programme selected
a
Page 7.
ʠ
Laundry is not dried correctly
or is still too damp.
After the end of the programme, warm laundry feels damper than it actually is.
Spread the laundry out and allow the heat to disperse.
Finely adjust the dryness level – this extends the drying time but does not
increase the temperature. Your laundry will become drier.
Select a programme with a longer drying time or increase the drying level. This
does not increase the temperature.
Select a time programme for extended drying of laundry that is still damp.
If you have exceeded the maximum load for the programme, the laundry may
not be dried correctly.
Clean the moisture sensor in the drum. A fine layer of limescale may adversely
affect the performance of the sensors and your washing will not dry properly.
Drying has been interrupted as a result of a power cut, because the condensate
container is full or because the maximum drying time has been exceeded.
ʠ
Drying time too long.
Rinse the fluff filters under running water
a
Page 4.
Insufficient supply of air
a
ensure that air can circulate.
Air inlet possibly blocked
a
Clear inlet
a
Page 10
.
Ambient temperature higher than 35 °C
a
ventilate the room.
ʠ
The humidity in the room
increases significantly.
Make sure the room is sufficiently ventilated.
ʠ
One or more programme
status indicator lamps are
flashing.
Clean the filter and air cooler
a
Page 4/6.
Check the installation conditions
a
Page 10.
Switch off, allow to cool, switch on again and restart the programme.
ʠ
The interior light (depending
on the model) does not work.
Pull out the appliance plug, remove the cover cap in the interior above the door
(use Torx 20 screw driver) and replace the bulb. Close the cover cap.
Never operate the dryer without a cover cap.
ʠ
Power failure.
Remove the laundry from the dryer immediately and spread out. This allows the
heat to dissipate. Be careful as the door, the drum and the laundry may be hot.
13
Safety instructions
Emergency
– Pull the appliance plug out of the socket immediately or disconnect the fuse.
ONLY use the
dryer...
– in rooms inside the house.
– for drying or unwrinkling/refreshing fabrics.
The dryer must
NEVER...
– be used for purposes other than those described above.
– be modified in terms of its technology or properties.
Hazards
– The dryer must not be used by children or persons who have not been instructed
in its use.
– Do not leave children unsupervised near the dryer.
– Keep pets away from the dryer.
– Remove all objects from pockets, and lighters in particular
a
risk of explosion.
– Do not lean or sit on the door
a
risk of tipping.
– Open the door carefully. Hot steam may escape. The clothes and drum may be hot
a
risk of burns.
Installation
– Secure loose leads or hoses, otherwise there is a
risk of tripping.
– Below 0 °C there is a possibility of frost damage.
Mains
connection
– Connect the dryer according to specifications to an AC earthed socket, otherwise
it cannot be guaranteed that the appliance is completely safe.
– The cable cross-section must be sufficient.
– Only use earth-leakage circuit breakers with the following symbol:
– The appliance plug and socket must be compatible.
– Do not use multiple plugs/connectors and/or extension cables.
– Do not touch or hold the appliance plug with wet hands
a
risk of electric shock.
– Never pull the appliance plug out of the socket by its cable.
– Do not damage the mains lead
a
risk of electric shock.
Operation
– Only laundry must be loaded into the drum.
Before switching on the dryer - check the contents.
– Do not use the dryer if the laundry has been in contact with solvents, oil, wax,
grease or paint (e.g. hair setting spray, nail polish remover, stain remover, cleaning
solvent, etc.)
a
fire/explosion hazard.
– The tumble dryer is not to be used if industrial chemicals have been used for
cleaning.
– Hazard caused by dust (e.g. coal dust, flour): do not use the dryer
a
risk
of explosion.
– Do not turn off the dryer until the drying process ends, unless the laundry will be
removed quickly and spread out, so that the heat can dissipate.
– Do not put laundry containing foamed material/rubber in the dryer
a
elastic
material may be destroyed and the dryer may be damaged due to possible
deformation of the foamed material.
– Light things, such as long hair, may be sucked into the air inlet of the dryer
a
Risk
of injury.
– Final part of a tumble dryer cycle occurs without heat (cool down cycle), to ensure
that the items are left at a temperature that ensures that the items will not be
damaged.
– Switch off the dryer once the programme has ended.
– The exterior of the appliance's rear panel becomes very hot during
operation. Never touch the hot surface of the appliance's rear panel. Keep
children away from the appliance
a
Risk of burns!
– For unwrinkling/refreshing fabrics, use distilled water only. Do not use
condensation, tap water or additives.
– Distilled/condensation water is not for drinking.
Defect
– Do not use the dryer if it is defective or if you suspect that it is.
Repairs must only be carried out by the after-sales service.
– Do not use a dryer with a faulty mains lead. To prevent risks, a faulty mains lead
must only be replaced by the after-sales service.
– Before changing the bulb of the interior light make absolutely sure you have pulled
the appliance plug from the socket
a
risk of electric shock.
Spare parts
– Only use genuine spare parts and accessories for safety reasons.
Disposal
– Dryer: unplug the appliance plug,
then
cut the mains lead from the appliance.
Dispose of the dryer at an approved public disposal facility.
– Packaging: keep all packaging out of reach of babies and children
a
danger
of suffocation.
– All materials are environmentally safe and recyclable.
Dispose of in an environmentally-responsible manner.
