background image

Operating the appliance       

en

27

Changing the program or 

adding laundry

You can remove or add laundry and 

change or alter the program at any time 

during drying.

1.

To pause the program, open the 

dryer door or press the Start button.

2.

Add or remove laundry.

3.

Select another program or an 

additional function, if required.

4.

Close the dryer door.

5.

Press the Start button.

Note:  

The program duration in the 

display panel is updated depending on 

the load and residual moisture in the 

laundry. The values displayed may 

change after the program is changed or 

the load is adapted.

Program interruption

The program can be interrupted at any 

time; to pause, open the dryer door or 

press the Start button.

Caution!

Risk of fire. Laundry may catch fire.

If you cancel the program, you must 

remove the laundry items and spread 

them out so that the heat can disperse.

Program end

“Ÿš

 appears in the display panel.

Removing laundry and 

switching off the dryer

1.

Remove the laundry.

2.

Turn the program selector to the "off" 

position.

Clean the fluff filter

Note:  

During drying, fluff and hair from 

the laundry is trapped by the fluff filter. If 

the fluff filter is blocked or dirty, this 

reduces the flow of air, which prevents 

the dryer from achieving its maximum 

performance. Clean fluff filters also 

reduce energy consumption and the 

drying time.

Clean the fluff filter 

after each

 drying 

cycle:

1.

Open the dryer door and remove all 

fluff from the door.

2.

Remove the fluff filter.

Summary of Contents for WT46N203IN









































Reviews: