![Siemens WT46G210ES Installation And Operating Instructions Manual Download Page 29](http://html.mh-extra.com/html/siemens/wt46g210es/wt46g210es_installation-and-operating-instructions-manual_378801029.webp)
Operating the appliance
en
29
Clean the fluff filter
after each
drying
cycle:
1.
Open the dryer door and remove
all fluff from the door.
2.
Remove the fluff filter.
3.
Remove the fluff from the recess in
the fluff filter.
Note:
Ensure that no fluff falls into
the open shaft.
4.
Open the fluff filter and remove
all the fluff.
5.
Rinse away the fluff under running
water or clean the fluff filter in
the dishwasher.
6.
Dry the fluff filter, close it and reinsert
the fluff filter.
Caution!
The dryer may be damaged.
Do not operate the dryer without a fluff
filter or if the fluff filter is defective.
Emptying the condensate
container
By default, the condensation from the
appliance runs into the condensation
container.
Alternatively, you have the option of
discharging the condensation water
*
supplied depending on the model. If you
choose to discharge the condensation
water into the waste-water system, you
will not need to empty the condensation
container during the drying programme
or after each time you use the dryer.
1.
Pull out the condensate container
horizontally.
* into the waste-water system via a
drain hose