Installation and connection
en
15
7.
Turn the condensation container
180° onto its underside and remove
the stopper that is fitted.Turn the
condensation container back over
and insert the stopper into the
recess in the top of the
condensation container.
8.
Pull the filter out of the lock-in slot
and place it into the recess in the top
of the condensation container.
9.
Slide in the condensation container
until it clicks into place.
The condensation is now discharged via
the drain hose into the waste-water
system or into a wash basin.
Note:
If you want to change the
condensation drain back to the
condensation container, carry out all
these steps in reverse order.
Optional accessories
Order optional accessories
*
from the
after-sales service:
■
Washer-dryer stack connection set:
To save space, the dryer can be
placed on top of a suitable washing
machine of the same width and
depth.
The dryer must be secured to the
washing machine using this
connection set.
Order number with pull-out worktop:
WZ20400
;
Order number without pull-out
worktop:
WZ11410
.
■
Platform:
For easier loading and unloading,
raise your dryer with a platform.
Transport laundry with the clothes
basket integrated into the platform
drawer.
Order number:
WZ20500
.
■
Basket for woollens:
Dry individual woollen items, sports
shoes and soft toys in the basket for
woollens.
Order number:
WZ20600
.
Transport and frost protection
1.
Empty the condensate container.
2.
Select any programme using
the programme selector.
3.
Press the Start button.
4.
Wait for 5 minutes.
Note:
The condensation is drained.
5.
Empty the condensate container
again.
6.
Switch off the dryer.
Note:
Despite draining, there will
always be some residual water in
the dryer.
Caution!
Any residual water may leak out
and cause material damage.
Transport the dryer in an upright
position.
Caution!
The dryer contains coolant and may be
damaged.
Allow the dryer to rest for two hours
before initial use.
* Depending on the model
Summary of Contents for WT45W460AU
Page 35: ...6 ...
