background image

en

    Safety instructions

10

Caution!

Material damage/damage to 

the appliance

If the amount of laundry in 

the appliance exceeds its 

maximum load capacity, it 

may not be able to operate 

properly, or this may result in 

material damage or damage 

to the appliance.

Do not exceed the maximum 

load capacity of dry laundry. 

Make sure you comply with 

the maximum load capacities 

specified for each of the 

programs. 

~

 Page 22

Material damage/damage to the appliance

If you operate the appliance 

without a fluff catcher (e.g. 

fluff filter, fluff depot, 

depending on appliance 

specifications), or if the fluff 

catcher is incomplete or 

defective, this may result in 

damage to the appliance.

Do not operate the appliance 

without a fluff catcher, or with 

a fluff catcher that is 

incomplete or defective.

Material damage/damage to the appliance

Light objects such as hair 

and lint may be sucked into 

the air inlet when the 

appliance is in operation.

Keep these away from the 

appliance.

Material damage/damage to the appliance

Foam and foam rubber may 

deform or melt if dried in the 

appliance.

Do not dry laundry items that 

contain foam or foam rubber 

in the appliance.

Material damage/damage to the appliance

If you pour the wrong 

quantity of detergent or 

cleaning agent into the 

appliance, this may result in 

material damage or damage 

to the appliance.

Use detergents/care 

products/cleaning agents 

and softeners in accordance 

with the manufacturers' 

instructions.

Material damage/damage to the appliance

If the appliance overheats, it 

may not be able to operate 

properly, or this may result in 

material damage or damage 

to the appliance.

Make sure that the 

appliance's air inlet is never 

obstructed when the 

appliance is in operation, 

and that the area around the 

appliance is adequately 

ventilated.

Cleaning/Maintenance

:

Warning

Risk of death!

The appliance is powered by 

electricity. There is a risk of 

electric shock if you come into 

contact with live components. 

Therefore please note:

Switch off the appliance. 

Disconnect the appliance 

from the power supply (pull 

out the plug).

Never take hold of the mains 

plug with wet hands.

Summary of Contents for WT45RVB7DN













































Reviews: