Siemens WT45HV10GC Installation And Operating Instructions Manual Download

Page: 27 / 40

Operating the appliance

Operating

the appliance

Operating the appliance

Loading laundry and

switching on the dryer

Note:

The dryer must be correctly

positioned and connected,

Page 14

Place the laundry in the drum.

Turn the programme selector to any

programme to switch the dryer on.

Close the dryer door.

Caution!

Possibility of material damage to the

dryer or laundry.

Take care not to trap any laundry in the

door.

Setting a programme

Note:

If you have activated the

childproof lock, you must deactivate it

before you can set a programme, see

Page 26

Select the required programme;

detailed information on the

programmes can be found on

Page 24

onwards.

Use the programme selector to set

the required programme. The default

programme settings for the selected

programme appear in the display

panel.

Note:

Default programme settings

are standard settings that are

already defined when a programme

is selected. After selecting a

programme, you can see the default

programme settings in the display

panel.

If required, adjust the default

programme settings. You can find

detailed information on this on

Page 26

onwards.

Starting the programme

Press the Start button.

Note:

If you want to lock the

programme to prevent it from being

adjusted inadvertently, you can select

the childproof lock, see

Page 26

Programme sequence

The programme status is indicated in

the display field.
e.g.

1:27

Expected programme duration

in hours and minutes.

Note:

When a programme is

selected, the expected drying

time for the recommended load

is displayed. During drying

moisture sensors detect the

remaining moisture in the load

and adjust the programme

length (except timed

programmes). This is visible via

the time remaining leaping

forward.

Dry

Iron Dry

Cupboard Dry

AntiCrease

Pause

“Ÿš

End

Summary of Contents for WT45HV10GC









































Search results

Summary of Contents for WT45HV10GC

Reviews:

Related manuals for WT45HV10GC

Brands by name

Popular brands

Siemens WT45HV10GC, Installation And Operating Instructions Manual

Search results

Summary of Contents for WT45HV10GC

Reviews:

Related manuals for WT45HV10GC

Brands by name

Popular brands