Positioning and connecting
en
27
5
Positioning and
connecting
Positioning and connecting
Standard accessories
Note:
Check the appliance for transport
damage. Never use a damaged
appliance. If you have any complaints,
contact the dealer from whom you
purchased the appliance or our
Customer Service.
In addition
, a hose clamp (24 - 40 mm
diameter, available from specialist
retailers) is required to connect the
water outlet hose to a siphon.
Useful tool
■
Spirit level for aligning
■
Wrench with:
– WAF13 for loosening the
transport braces and
– WAF17 for aligning the appliance
Safety instructions
:
Warning
Risk of injury!
■
The washing machine is very heavy.
Be careful when lifting/transporting
the washing machine.
■
When the washing machine is lifted
by its protruding parts (e.g. the
washing machine door), the
components may break off and
cause injuries.
Do not lift the washing machine by
protruding parts.
■
If the hose and mains cables are not
routed properly, there is a risk of
tripping and injury.
Lay hoses and cables in such a way
that there is no risk of tripping.
Caution!
Damage to the appliance
Frozen hoses may rip/burst.
Do not install the washing machine in
areas exposed to frost or outdoors.
Caution!
Water damage
The connection points for the water
supply hose and water drain hose are
under high water pressure. To prevent
leaks and water damage, you must
follow the instructions in this section.
(
Mains lead
0
Bag:
■
Installation and operating
instructions
■
Customer Service location
directory*
■
Warranty*
■
Cover caps for openings after
the transport braces have
been removed
8
Water inlet hose on AquaStop
models
@
Water outlet hose
3
+
#
H
Elbow for securing the water
outlet hose*
P
Cold water inlet hose on
Standard/Aqua-Secure models
*
Depending on the model
