Siemens WQ33G2D1NL, User Manual

Page: 31 / 52

ServiceNL
12.4 Starting the program
2.
Remove the laundry.
12.8 Switching off the device
Remark:If you want to change the time
until the program end, first set the
ready in time.
▶
Set the program selector to .
12.9 Fluff filter
▶
onStart Pauseto press.
aThe display shows whether the program
maduur or the ready in time
displayed.
aAfter the program end, it shows
display: "End".
During drying, the fluff from the
laundry is collected in the fluff filter.
The fluff filter protects the device
against fluff.
Cleaning the fluff filter
12.5 Adding laundry
When the drying program is finished
or if the display shows a message
during use, clean the fluff filter. You can always remove or add the
laundry after the program has started.
1.
onStart Pauseto press.
Remark:If you do not clean the device
as described, the device function may
be impaired.
The cooling process starts automatically
after approx. 30 seconds and cools the
laundry with a rotating drum.
If you want to avoid or abort the
cooling process, open the door.
→ †Display", page 20
Requirements
†The display shows after drying:
"end"
†or during use: .
2.
Open the appliance door.
3.
Reload or remove the laundry.
4.
Close the appliance door.
5.
PressStart Pause.
1.
Open the door.
2.
Remove the fluff from the door.
12.6 Program Cancel
1.
onStart Pauseto press.
The cooling process starts automatically
after approx. 30 seconds and cools the
laundry with a rotating drum.
If you want to avoid or abort the
cooling process, open the door.
→ †Display", page 20
2.
Open the appliance door.
3.
Remove the laundry
→ Page 31†
12.7 Laundry
from take
1.
Open the device
atdEUR.
31