background image

en

    Safety instructions

6

:

Warning

Risk of poisoning!

Detergents and care products 

may result in poisoning if 

consumed.

If accidentally swallowed, seek 

medical advice. Keep 

detergents and care products 

out of the reach of children.

:

Warning

Eye/skin irritation!

Contact with detergents or care 

products may cause eye/skin 

irritation.

Rinse eyes/skin thoroughly if 

they/it come(s) into contact 

with detergents or care 

products. Keep detergents and 

care products out of the reach 

of children.

Installation

:

Warning

Risk of electric shock/fire/

material damage/damage to 

the appliance!

If the appliance is not installed 

properly, this may lead to a 

dangerous situation. Ensure 

the following:

The mains voltage on your 

power socket must match 

the rated voltage specified 

on the appliance 

(identification plate). The 

connected loads and the 

required fuse protection are 

specified on the identification 

plate.

The appliance must not be 

supplied through an external 

switching device, such as a 

timer, or connected to a 

circuit that is regularly 

switched on and off by a 

utility.

The mains plug and the 

protective contact socket 

must match and the earthing 

system must be correctly 

installed.

The installation must have an 

adequate cross section.

The mains plug must be 

freely accessible at all times. 

If this is not possible, in 

order to comply with the 

relevant safety regulations, a 

switch (all pole 

disconnection) must be built 

into the permanent 

installation in accordance 

with electrical installation 

regulations.

If using a residual current 

circuit breaker, only use one 

that bears the following 

mark: 

z

. The presence of 

this mark is the only way to 

be sure that it fulfils all the 

applicable regulations.

:

Warning

Risk of electric shock/fire/

material damage/damage to 

the appliance!

If the appliance's mains cable is 

altered or damaged, this may 

result in electric shock, short 

circuiting or fire due to 

overheating.

Summary of Contents for WN44A1C0DN

























































Reviews: