Home Connect
en
49
Connecting to your home
network automatically
If your router has a WPS function, you
can connect the appliance to your home
network automatically.
If your router does not have a WPS
function, you will need to connect the
appliance to your home network
manually .
Wi-Fi must be switched on on the
appliance.
1.
Switch the appliance on.
2.
Press and hold the
Remote start
}
button for more than 3 seconds.
‘ž£
(connect automatically) will
appear on the display panel.
3.
Press the Start button to connect.
†
will flash on the display panel.
The appliance will now try to connect
to your home network.
4.
Activate the WPS function on your
home network router within the next
2 minutes.
If the appliance has connected to your
home network successfully,
™©Ÿ
(connected) will appear on the display
panel and
†
will be lit continuously.
5.
You can exit the Home Connect
settings by pressing the
Remote start
}
button.
Note:
If a connection could not be
established,
“§§
(fault) will appear on
the display panel. Check whether your
appliance is in range of your home
network.Try connecting automatically
again or connect your appliance
manually
.
