35
Standard settings
Ø
If required, change basic dosages for detergent and softener:
The
basic dosage amount
to be set corresponds:
For
detergents
– to the manufacturer’s recommendation for
normal soiling and to the particular water hardness.
For
softeners
– to the manufacturer’s recommendation for
medium softness and to the particular water hardness.
This information can be found on the package label of the
detergent/softener or ask the manufacturer directly.
To determine the existing water hardness, use a test strip or
check with your water utility company.
My water hardness:
Here is an example of the detergent dosage on a package
label:
²
– Factory setting of the basic dosage: for detergent
75 ml
and
for softener 36 ml.
– In the case of more concentrated detergents reduce the
basic dosage amount.
Ø
If intensive foaming occurs repeatedly during washing, please
check the basic dosage setting and dosage strength.
Furthermore, some liquid detergents may have a tendency to
excessive foaming. If the basic dosage settings and dosage
strengths are correct, it is recommended to use a different
liquid detergent.
Ø
If required, convert i-Dos
i
I
ô
dispenser contents.
Instead of softener, a second liquid detergent can also be
used in dispenser i-Dos
i
I
ô
.
²
– An additional changeable insert for a second detergent is
enclosed and can be fitted in the fill cover.
Degree of soiling
ヾ
Water hardness
ゝ
light
normal
heavy
very heavy
soft/medium
55 ml
75 ml
120 ml
160 ml
hard/very hard
75 ml
95 ml
150 ml
180 ml
