20
Ø
End of programme by Rinse Hold
1. Select
Spin
(If required, adjust the spin speed) or
Drain
.
2. Select
Ü
(
Start
/Pause).
End of the programme
Finished, remove washing
is indicated on the display panel.
If
Foam has been detected
is also indicated on the display panel,
the washing machine has detected too much foam during the
wash programme and therefore automatically activates additional
rinse cycles to eliminate the foam.
²
Dose less detergent in the next wash cycle with the same load.
Rinse hold reached:
Select "spin" or "drain"
and then "start".
Spin
Drain
b
b
v
Finished, remove washing
