Siemens WM16XK02EU, User Manual And Installation Instructions

Page: 34 / 60

en
Intelligent dosing system
34
15.2 Filling the dispensers
If you want to use the intelligent dos-
ing system or if the appliance dis-
plays a notification during operation
of the appliance, fill the dispensers.
Note:
Fill the dispensers only with
suitable detergent and care products
→
Page 30 .
If you want to add more liquid deter-
gent or fabric softener in the dis-
penser, use the same product.
If you want to replace the liquid de-
tergent or fabric softener in the dis-
penser with another product, clean
the detergent drawer beforehand.
→
"Cleaning the detergent drawer",
Page 37
If you want to use both dispensers
for liquid detergent, adjust the con-
tents of the dispensers →
Page 34 .
Requirement:
The display shows a
notification to fill the dispenser.
→
"Display", Page 22
→ "Display", Page 22
1.
Pull out the detergent drawer.
2.
Open the dispenser cover.
3.
Pour liquid detergent and fab-
ric softener into the relevant
dispensers.
→
"Detergent drawer", Page 18
Do not exceed the marking for the
maximum fill level when filling.
4.
Close the dispenser cover.
Note:
To prevent the liquid deter-
gent or fabric softener from drying
out, close the dispenser cover im-
mediately after filling.
5.
If required, pour washing aid into
the compartment for manual dos-
ing.
→
"Adding detergent and care
product", Page 31
6.
Push in the detergent drawer.
7.
Adjust the basic dosage
→
Page 35 .
15.3 Dispenser contents
Notes
¡
If you change the contents of the
dispenser, the basic dosage for
this dispenser is reset.
¡
If you use both dispensers for li-
quid detergent, you must select a
dispenser which is to be used dur-
ing washing.
Adjusting the dispenser contents
1.
Press and hold for approx. 3
seconds.