Basic operation
en
43
6.
Reinsert the detergent drawer.
Adding detergent and care
product
Note:
Please read the safety informa-
to ensure that you use
the appliance safely.
Requirement:
Find out the optimum
dosage for detergent and care product.
→
1.
Pull out the detergent drawer.
2.
Pour in detergent.
→
3.
If required, add the care product.
4.
Push in the detergent drawer.
Starting the programme
Note:
If you want to change the time
until the programme ends, set the
"Ready in" time first.
▶
Press
inicio / pausa + carga
.
a
The drum rotates and load detection
takes place. This can take up to 2
minutes, after which water enters the
drum.
a
The display shows either the pro-
gramme duration or the "Ready in"
time.
a
If you start a programme with active
oxygen, the drum lights up after the
programme starts and the mist that
is created can be seen.
Adding laundry
Notes
¡
Please read the safety information
→
to ensure that you use the
appliance safely.
¡
If you a start a programme with act-
ive oxygen, you cannot add any
laundry after the programme has
started.
1.
Press
inicio / pausa + carga
.
The appliance is paused and checks
whether it is possible to add or re-
move laundry.
2.
Add or remove laundry.
3.
Close the door.
4.
Press
inicio / pausa + carga
.
Cancelling the programme
Once the programme has started, you
can cancel it at any time.
Notes
¡
Please read the safety information
→
to ensure that you use the
appliance safely.
¡
If you cancel a programme with act-
ive oxygen, the door will remain
locked for up to 25 minutes until
there is no longer any active oxygen
in the drum.
and
flash while
the active oxygen is being removed.
The door is then unlocked.
1.
Press
inicio / pausa + carga
.
2.
Open the door.