Siemens WM16W590AU Page 21 Instruction Manual And Installation Instructions Download

Page: 21 / 48

Additional programme settings

Additional programme

settings

Additional programme settings

An overview of all additional settings,

which can be selected depending on

the programme, can be found from

Page 14

speedPerfect

Washing in a shorter time while

achieving a washing result that is

consistent with, but uses more energy

than, the selected programme, without

the speedPerfect

setting.

Note:

Do not exceed the maximum

load.

Overview of programmes

Page 14

ecoPerfect

Energy-optimised washing by reducing

the temperature while achieving a

washing result that is consistent with the

selected programme, without the

ecoPerfect

setting.

Prewash

For heavily soiled laundry.

Note:

Pour detergent into

compartments

and

Rinse Plus

Additional rinse cycle for particularly

sensitive skin and/or for areas with very

soft water.

Less Ironing

Reduces creasing thanks to a special

spin sequence followed by fluffing and

reduced spin speed.

Note:

The washing's residual moisture

is increased.

Anti-Stain System

(Select

)

There are four types of stain to choose

from:

The washing machine adjusts the

average washing temperature, drum

movement and soaking time to the

specific type of stain. Hot or cold water,

gentle or intensive washing and long or

short soaking ensure that the wash-

programme sequence is specially

adapted to each type of stain. This

makes sure that stains are treated in the

best possible way.

Note:

Pressing and holding the buttons

automatically runs through the set

values.

Food-based grease/oil

Blood

Red wine

Grass

Summary of Contents for WM16W590AU

















































Search results

Summary of Contents for WM16W590AU

Reviews:

Related manuals for WM16W590AU

Brands by name

Popular brands

Siemens WM16W590AU, Instruction Manual And Installation Instructions

Search results

Summary of Contents for WM16W590AU

Reviews:

Related manuals for WM16W590AU

Brands by name

Popular brands