Siemens WM14YH89GB Instruction Manual And Installation Instructions Download Page 37

Page: 37 / 72

Programme default settings

Programme default

settings

Programme default settings

The programme default settings are

displayed in the main menu after

selecting the programme.
Display panel

Page 27

You can change the default settings:

■

Temperature , Spin speed and

Finish in as long as the arrow is

displayed in the main menu and/or

■

the i-Dos settings ,

Page 38

An overview of all programme settings,

which can be selected depending on

the programme, can be found from

Page 31

Temperature

Depending on what stage the

programme is in, you can change the

set temperature before and during the

programme.
The maximum temperature that can be

set depends on the programme that has

been selected.

Spin speed

(Spin)
Depending on what stage the

programme is in, you can change the

spin speed (in rpm; revolutions per

minute) before and during the

programme.
The maximum speed that can be set

depends on the model and programme

that has been selected.

Setting 0

: No spin cycles, the water is

only drained. The laundry stays wet

inside the drum, e.g. for items that

should not be spun.

Finish in

The programme duration is shown after

selecting the programme.

Before starting the programme

, you

can preselect the programme end in

hourly increments (h = hour) up to a

maximum of 24 hours.

After starting the programme

, the

selected number of hours

e.g. 8 h

shown on the display panel and counts

down until the wash programme starts.

The duration of the programme is then

displayed.

Note:

The programme duration is

automatically adjusted when the

programme is running. Changes to the

programme default settings or

programme settings, options, foam

detection function, unbalanced load

detection, the load or soiling may also

change the programme duration.

After starting the programme

, you can

change the preselected number of

hours as follows:

Press the

button.

Use the

Finish in

button to change

the number of hours.

Press the

button.

After starting the programme

, while the

programme is running, you can add or

remove laundry if necessary.

Page 45

www.devicemanuals.eu/

Summary of Contents for WM14YH89GB









































































Search results

Summary of Contents for WM14YH89GB

Reviews:

Related manuals for WM14YH89GB

Brands by name

Popular brands

Siemens WM14YH89GB, Instruction Manual And Installation Instructions

Search results

Summary of Contents for WM14YH89GB

Reviews:

Related manuals for WM14YH89GB

Brands by name

Popular brands