43
Drain pump blocked
m
Warning!
Danger of scalding!
Wash liquor is hot when washing at high temperatures.
You may be scalded if you touch the hot wash liquor.
Allow wash liquor to cool down.
²
Turn the tap off to prevent more water from flowing in and to
ensure that it is drained via the pump.
1.
Switch off the device. Pull out the mains plug.
2.
Open service flap.
3.
Remove service flap.
4.
Take the drainage hose out of the holder. Remove the
sealing cap, drain water into a suitable receptacle.
Press on sealing cap and insert drainage hose into the
holder.
Note:
Residual water may run out.
5.
Carefully unscrew the pump cover. Clean the interior, pump
cover thread and pump housing (fan impeller in the
detergent-solution pump must rotate).
6.
Reinsert and screw on pump cover. Handle should be
vertical.
