Siemens WM14Y740ES Instruction Manual And Installation Instructions Download Page 34

Page: 34 / 60

Cleaning

and

maintenance

Care and maintenance

Warning!

Danger of death from electric shock!

Danger of death if live parts are touched.

Switch off the appliance. Pull out the mains plug!

Caution!

Fire and explosion hazard!

If solvent cleaning agents, e.g. petroleum ether, are

used in the washing machine, components may be

damaged and toxic fumes generated.

Do not use solvent-based cleaning agents.

Caution!

Washing machine may be damaged!

If solvent cleaning agents, e.g. petroleum ether, are

used on the washing machine, the surfaces may be

damaged.

Do not use solvent-based cleaning agents.

Machine housing/Control panel

Remove detergent residue immediately.

Wipe with a soft, damp cloth.

Do not clean the appliance with a water jet.

Drum

Use chlorine-free cleaning agent, not steel wool.
If there is an odour in the washing machine, run

algodón/algodão (Cottons) 90 °C

programme. Use standard

detergent.

Descaling

Not required if detergent dosed correctly. However, if this does

occur, follow the instructions of the descaling agent

manufacturer. Suitable descalers can be purchased on our

website or from customer service.

Page 42

Summary of Contents for WM14Y740ES





























































Search results

Summary of Contents for WM14Y740ES

Reviews:

Related manuals for WM14Y740ES

Brands by name

Popular brands

Siemens WM14Y740ES, Instruction Manual And Installation Instructions

Search results

Summary of Contents for WM14Y740ES

Reviews:

Related manuals for WM14Y740ES

Brands by name

Popular brands