Siemens WM14Y540GR Instruction Manual Download Page 4 | Manualshive

Page: 4 / 60

Siemens WM14Y540GR Instruction Manual Download Page 4

4

Before washing

Intended use

Ø

For use in the household only.

Ø

The washing machine is suitable for washing machine-
washable textiles and hand-washable wool in wash liquor.

Ø

The washing machine is suitable to be operated with cold
drinking water and commercially available detergents and
care products which are suitable for use in washing
machines.

Ø

When dosing all detergents, cleaning aids, cleaning products
and cleaning agents, always follow the manufacturer's
instructions.

Ø

The washing machine may be operated by children from
8 years of age, by persons who have limited physical,
sensory or mental abilities and by persons who have
inadequate experience or knowledge, provided they

are

supervised

or

have been instructed

by a responsible

person.

Ø

Keep pets away from the washing machine!

Read and follow the operating and installation instructions and all
other information enclosed with the washing machine.
Retain documents for subsequent use.

«
...
2
3
4
5
6
...
»

Summary of Contents for WM14Y540GR





























































Reviews:

No comments