Siemens WM14W790IL Instruction Manual And Installation Instructions Download

Page: 52 / 56

Technical data

Technical data

Technical data

Dimensions:

850 x 600 x 590 mm
(height x width x depth)

Weight:

70 - 85 kg (depending on model)

Mains connection:

Mains voltage 220 - 240 V, 50 Hz
Nominal current 10 A
Nominal power 1900 – 2300 W

Water pressure:

100 - 1000 kPa (1 - 10 bar)

Power consumption when switched

off:

0,12 W

Power consumption when left on:

0,43 W

Delicate / Silk

30 %

Wool

45 %

Programme

Approximate information on the residual moisture***
WM16W...

WM14W...

WM12W...

WM10W...

Max. 1600

rpm

Max. 1400

rpm

Max. 1200

rpm

Max. 1000

rpm

* Program setting with maximum spin speed for testing according to IEC60456.

The programme temperature information is based on the temperature stated on the care label for the

fabrics. The actual washing temperature may deviate from the stated programme temperature for

energy-saving reasons.

** Observed values may deviate from the indicated values due to influence of water pressure, hardness

and inlet temperature, ambient temperature, type, amount and soiling of laundry, detergent used,

fluctuations in power supply and selected additional functions.

*** Information on residual moisture based on programme-dependent spin-speed limit and maximum

loads.

Summary of Contents for WM14W790IL

























































Search results

Summary of Contents for WM14W790IL

Reviews:

Related manuals for WM14W790IL

Brands by name

Popular brands

Siemens WM14W790IL, Instruction Manual And Installation Instructions

Search results

Summary of Contents for WM14W790IL

Reviews:

Related manuals for WM14W790IL

Brands by name

Popular brands