Siemens WM14W768DN Instruction Manual And Installation Instruction Download Page 54

Page: 54 / 56

Aqua-Stop warranty

Aqua-Stop warranty

Aqua-Stop warranty

Only for appliances with Aqua-Stop

In addition to warranty claims against

the vendor based on the purchase

agreement and to our appliance

warranty, we will provide compensation

under the following conditions:

If water damage is caused due to a

fault in our Aqua-Stop system, we

will compensate domestic

customers for the damage caused.

The liability guarantee is valid for the

service life of the appliance.

It is a prerequisite of all warranty

claims that the appliance with Aqua-

Stop must have been installed and

connected correctly in accordance

with our instructions; this also

includes a correctly fitted Aqua-Stop

extension (genuine accessories).

Our warranty does not cover

defective feed lines or fittings

leading to the Aqua-Stop connection

at the tap.

Appliances with Aqua-Stop do not

need to be supervised during

operation, nor secured afterwards by

turning off the tap.

The tap only needs to be turned off if

you are away from home for a long

period, e.g. for several weeks'

holiday.

Summary of Contents for WM14W768DN

























































Search results

Summary of Contents for WM14W768DN

Reviews:

Related manuals for WM14W768DN

Brands by name

Popular brands

Siemens WM14W768DN, Instruction Manual And Installation Instruction

Search results

Summary of Contents for WM14W768DN

Reviews:

Related manuals for WM14W768DN

Brands by name

Popular brands