Siemens WM14W5H0GB Instruction Manual And Installation Instructions Download

Page: 47 / 60

Home Connect

Set the programme to position 6.

—˜š

(update) appears in the display.

Start/Reload

flashes if a software

update is available.

Press

Start/Reload

¢“†

appears in the display.

Press

Start/Reload

Note:

The software update may take

several minutes. Do not switch the

appliance off while updates are being

installed.

Information on data protection

When your appliance is connected for

the first time to a Wi-Fi network, which is

connected to the Internet, your

appliance transmits the following

categories of data to the Home Connect

server (initial registration):

■

Unique appliance identification

(consisting of appliance codes as

well as the MAC address of the

installed Wi-Fi communication

module).

■

Security certificate of the Wi-Fi

communication module (to ensure a

secure data connection).

■

The current software and hardware

version of your household appliance.

■

Status of any previous resetting to

factory settings.

This initial registration prepares the

Home Connect functions for use and is

only required when you want to use

these Home Connect functions for the

first time.

Note:

Ensure that the Home Connect

functions can be used only in

conjunction with the Home Connect

app. Information on data protection can

be accessed in the Home Connect app.

Declaration of Conformity

BSH Hausgeräte GmbH hereby

declares that the appliance with

Home Connect functionality meets the

basic requirements and other relevant

provisions of the Directive 2014/53/EU.
A detailed RED Declaration of

Conformity can be found online at

www.siemens-home.bsh-group.com

among the additional documents on the

product page for your appliance.

2.4 GHz band: max. 100 mW

Summary of Contents for WM14W5H0GB





























































Search results

Summary of Contents for WM14W5H0GB

Reviews:

Related manuals for WM14W5H0GB

Brands by name

Popular brands

Siemens WM14W5H0GB, Instruction Manual And Installation Instructions

Search results

Summary of Contents for WM14W5H0GB

Reviews:

Related manuals for WM14W5H0GB

Brands by name

Popular brands