background image

Environmental protection    

en

13

7

Environmental 

protection

Environmental protection

Packaging/used appliance

Tips on economical use

Always fill the appliance with the 

maximum amount of laundry for the 

relevant programme.

Overview of programmes 

~

 Page 30

Wash normally soiled laundry 

without a prewash.

Save energy and detergent when 

washing lightly and normally soiled 

laundry. 

~

 Page 29

The selectable temperatures apply 

to the care labels on the textiles. The 

temperatures in the machine may 

deviate from this so that you get the 

optimum mix of energy-saving and 

washing results.

Information on energy and water 

consumption

~

 Page 27

The displays provide information 

about the relative level of energy and 

water consumption in the selected 

programmes.

The more indicator lights light up, 

the higher the programme's 

consumption.

This enables you to compare the 

consumption levels of the different 

programmes when choosing your 

programme settings and decide on 

an energy- and water-saving 

programme setting.

Energy-saving mode

: The display 

panel lighting goes out after a few 

minutes and the 

Ü

 button flashes. 

Press any button to activate the 

lighting.

Energy-saving mode is not activated 

if a programme is running.

Automatic switch off:

 If the 

appliance is not operated for a 

prolonged period, it may 

automatically switch off before the 

programme starts and when the 

programme has ended to save 

energy. Press the main switch again 

to switch on the appliance.

Switching the 

~

 Page 43

 function 

on/off

If the laundry is subsequently dried 

in a tumble dryer, select the spin 

speed according to the tumble dryer 

manufacturer's instructions.

)

Dispose of packaging in an 

environmentally-responsible 

manner. 

This appliance is labelled in 

accordance with European 

Directive 2012/19/EU 

concerning used electrical and 

electronic appliances (waste 

electrical and electronic 

equipment - WEEE).

The guideline determines the 

framework for the return and 

recycling of used appliances 

as applicable throughout the 

EU.

Summary of Contents for WM14W5G2

























































Reviews: