background image

en

    Cleaning and maintenance

26

Machine housing/control 

panel

Wipe the housing and the control 

panel with a soft, damp cloth.

Remove the detergent residue 

immediately.

Do not clean with a water jet.

Drum

Use chlorine-free cleaning agents, do 

not use steel wool.
If there are odours in the washing 

machine, or to clean the drum, run the 

Cottons

 

90 °C

 programme without 

laundry. Add washing powder.

Descaling

Descaling should not be necessary if 

the detergent is measured out correctly. 

However, if it is required, follow the 

manufacturer's instructions for the 

descaling agent. Suitable descalers can 

be obtained via our website or from 

customer services. 

~

 Page 32

Detergent drawer and housing

If the washing machine contains 

detergent or fabric softener residues:

1.

Pull out the detergent drawer. Press 

down the insert and fully remove the 

drawer.

2.

To remove the insert: Push the insert 

upwards from below with your finger.

3.

Clean the detergent dispenser tray 

and insert with water and a brush, 

and dry it. Clean the inside of the 

housing as well.

4.

Fit the insert and lock it in place 

(push the cylinder onto the guide 

pin).

5.

Push in the detergent drawer.

Note:  

Leave the detergent drawer open 

so that any residual water can 

evaporate.

Summary of Contents for WM14W460HK













































Reviews: