Siemens WM14US60EU User Manual And Assembly Instructions Download Page 54

Page: 54 / 68

Troubleshooting

Fault

Cause

troubleshooting

The programme does not
start.

Press

Start | Reload

to start

the programme.

The detergent drawer has
not been pushed in as far as
it can go.

▶

Push the detergent drawer in as far
as it will go.

The pump for the intelligent
dosing system is blocked.

Switch off the appliance.

Clean the pump unit.

→

"Cleaning the detergent drawer",

Page 43

If this indicator appears again, call
our after-sales service.

→

"Customer Service", Page 63

Note:

You can start the washing pro-

gramme if you deactivate the intelli-
gent dosing system and dose manu-
ally.

→

"Buttons", Page 24

The door cannot be opened.

– – – –

is activated.

▶

Continue the programme by select-
ing

Spin

Empty

and

pressing

Start | Reload

→

"Resuming the programme when

the programme status is Rinse
Hold", Page 39

The temperature is too high.

▶

Wait until the temperature has
dropped.

▶

→

"Cancelling the programme",

Page 39

Water level is too high.

▶

Start the

Empty

programme.

Power failure.

▶

Open the door using the emergency
release.

→

"Emergency release", Page 61

The water is not draining.

Drain pipe or water outlet
hose is blocked.

▶

Clean the drain pipe and the water
outlet hose.

Drain pipe or water drain
hose is caught or jammed.

▶

Ensure that the drain pipe and wa-
ter drain hose are not kinked or
trapped.

Drain pump is blocked.

▶

→

"Cleaning the drain pump",

Page 45

– – – –

is activated.

▶

Continue the programme by select-
ing

Spin

Empty

and

pressing

Start | Reload

Summary of Contents for WM14US60EU





































































Search results

Summary of Contents for WM14US60EU

Reviews:

Related manuals for WM14US60EU

Brands by name

Popular brands

Siemens WM14US60EU, User Manual And Assembly Instructions

Search results

Summary of Contents for WM14US60EU

Reviews:

Related manuals for WM14US60EU

Brands by name

Popular brands