Siemens WM14U940 Series Instruction Manual And Installation Instruction Download Page 25

Page: 25 / 60

Operating the appliance

Load the laundry unfolded into the

drum.

Close the door.

Caution!

Exerting excessive pressure on the

door may damage it.

Do not apply a high amount of

pressure on the door.

Caution!

Risk of material damage to the

appliance or laundry.

Make sure that laundry is not

trapped in the door.

Programme settings

Once you have selected a programme,

you will be shown preset programme

settings. Preset programme settings are

recommendations for the programme

you have selected and will vary.
You can find further programme

settings by touching

More

You can do the following to

programme settings:

■

Adjust them

■

Activate/deactivate them

Adjusting

Touch the programme setting.

The setting options will be displayed.

Touch or swipe your finger along the

bar until the required value is

selected.

Notes

– The changes will be applied

immediately and do not need to

be confirmed.

– The changes will not be saved

permanently for the programme.

Summary of Contents for WM14U940 Series





























































Search results

Summary of Contents for WM14U940 Series

Reviews:

Related manuals for WM14U940 Series

Brands by name

Popular brands

Siemens WM14U940 Series, Instruction Manual And Installation Instruction

Search results

Summary of Contents for WM14U940 Series

Reviews:

Related manuals for WM14U940 Series

Brands by name

Popular brands