background image

Safety instructions

en

5

(

Safety instructions

Saf

et

in

st

ruc

ti

ons

Electrical safety

:

Warning

Danger of death!

There is a risk of electric shock 

if you touch live components.

Never touch or hold the 

mains plug with wet hands.

Only pull out the mains cable 

by the plug and never by the 

cable, as this could damage 

it.

Risk of injury

:

Warning

Risk of injury!

When the washing machine 

is lifted by its protruding 

parts (e.g. the washing 

machine door), the 

components may break off 

and cause injuries. 

Do not lift the washing 

machine by protruding parts.

If you climb on the washing 

machine, the worktop may 

break and cause injuries.

Do not climb onto the 

washing machine.

If you lean on the washing 

machine door when it is 

open, the washing machine 

may tip over and cause 

injuries.

Do not lean on the washing 

machine door when it is 

open.

Reaching into the drum 

when it is turning can cause 

injuries to hands.

Do not reach into the drum 

when it is turning. 

Wait until the drum has 

stopped turning.

:

Warning

Risk of scalding!

When you are washing at high 

temperatures, there is a risk of 

scalding if you come into 

contact with hot water e.g. if hot 

water is being drained into a 

wash basin. 

Do not reach into the hot 

detergent solution.

Safety for children

:

Warning

Danger of death!

If children play with the washing 

machine, they may get into life-

threatening situations or injure 

themselves.

Do not leave children 

unattended near the washing 

machine.

Do not let children play with 

the washing machine.

:

Warning

Danger of death!

Children may lock themselves 

in appliances, putting their lives 

at risk.

For appliances that have 

reached the end of their service 

life: 

Disconnect the mains plug.

Summary of Contents for WM12K268BY









































Reviews: