Siemens WM12K210ME Instruction Manual And Installation Instruction Download Page 17

Page: 17 / 40

Additional programme settings

The symbols

YES

and

light up on

the display panel. The washing

machine door can be opened and

laundry can be added.

Close the washing machine door.

Press the

Start

/Reload

button.

The preselected time continues to

run.

Additional programme

settings

Add

ion

ogr

amme

set

ngs

speed

For washing in a shorter time with a

washing result comparable to that of the

standard programme.

Note:

Do not exceed the maximum

load.

Overview of programmes

Page 13

eco

For saving energy with a washing result

comparable to that of the standard

programme.

Less Iron

Special spin sequence with subsequent

fluffing. Gentle final spin – residual

moisture in the laundry slightly

increased.

Operating the

appliance

Ope

rat

ing

the

app

anc

Preparing the washing

machine

Note:

The washing machine

must be

correctly installed

and

connected

From

Page 32

Connect the mains plug.

Turn on the water tap.

Open the door.

Check that the drum is completely

drained. Drain if necessary.

Select programme/switch on

the appliance

Note:

If you have activated the

childproof lock, you must first deactivate

it before you can set a programme.

Page 20

Use the programme selector to select

the required programme. Can be turned

in either direction.
The machine is switched on.

The display panel shows the following

information consecutively for the

selected programme:

■

The programme duration,

■

The preset temperature,

■

The preset spin speed and

■

The maximum load.

Summary of Contents for WM12K210ME









































Search results

Summary of Contents for WM12K210ME

Reviews:

Related manuals for WM12K210ME

Brands by name

Popular brands

Siemens WM12K210ME, Instruction Manual And Installation Instruction

Search results

Summary of Contents for WM12K210ME

Reviews:

Related manuals for WM12K210ME

Brands by name

Popular brands