Siemens WM10K21SME, Instruction Manual And Installation Instructions

Page: 17 / 40

Additional programme settings
en
17
3.
Close the washing machine door.
4.
Press the
Start
/Reload
!
button.
The preselected time continues to
run.
\
Additional programme
settings
Additional programme settings
G
speed
For washing in a shorter time with a
washing result comparable to that of the
standard programme.
Note:
Do not exceed the maximum
load.
Overview of programmes
~
Page 13
¦
eco
For saving energy with a washing result
comparable to that of the standard
programme.
æ
Less iron
Special spin sequence with subsequent
fluffing. Gentle final spin – residual
moisture in the laundry slightly
increased.
1
Operating the
appliance
Operating the appliance
Preparing the washing
machine
Note:
The washing machine
must be
correctly installed
and
connected
.
From
~
Page 32
1.
Connect the mains plug.
2.
Turn on the water tap.
3.
Open the door.
4.
Check that the drum is completely
drained. Drain if necessary.
Select programme/switch on
the appliance
Note:
If you have activated the
childproof lock, you must first deactivate
it before you can set a programme.
~
Page 20
Use the programme selector to select
the required programme. Can be turned
in either direction.
The machine is switched on.
The display panel shows the following
information consecutively for the
selected programme:
■
The programme duration,
■
The preset temperature,
■
The preset spin speed and
■
The maximum load.