Cleaning and maintenance
en
21
2
Cleaning and
maintenance
Cl
ean
ing
and
mai
nt
ena
nc
e
:
Warning
Risk of death!
There is a risk of electric shock if you
touch live components.
Switch off the appliance and unplug the
mains plug.
:
Warning
Risk of poisoning!
Toxic vapours can be produced by
cleaning agents that contain solvents,
e.g. cleaning solvent.
Do not use cleaning agents that contain
solvents.
Caution!
Damage to the appliance
Cleaning agents that contain solvents,
e.g. cleaning solvent, can damage
surfaces and components in the
machine.
Do not use cleaning agents that contain
solvents.
Machine housing/control
panel
■
Wipe the housing and the control
panel with a soft, damp cloth.
■
Do not use any abrasive cloths,
scourers or cleaning agents
(stainless steel cleaners).
■
Remove the detergent residue
immediately.
■
Cleaning with a jet of water is
prohibited.
Drum
Wipe the inside of the rubber seal dry
with a cloth. Leave the washing machine
door open in order that the drum can
dry. Use chlorine-free cleaning agents
and not steel wool.
Descaling
Note:
Make sure that there is no
laundry in the machine.
Descaling should not be necessary if
the detergent is measured out correctly.
However, if it is required, follow the
manufacturer's instructions for the
descaling agent. Suitable descalers can
be obtained via our website or from our
after-sales service.
Detergent drawer and housing
If the washing machine contains
detergent or fabric softener residues:
1.
Pull out the detergent drawer. Press
down the insert and fully remove the
drawer from the housing.
2.
To remove the insert, push the insert
up from below with your finger.
3.
Clean the detergent dispenser tray
and insert with water and a brush,
and dry it. Also remove any
detergent or fabric softener residues
in the housing.
4.
Fit the insert and lock it in place
(push the cylinder onto the guide
pin).
5.
Push in the detergent drawer.
Note:
Leave the detergent drawer open
so that any residual water can
evaporate.
