background image

en

    Safety instructions

6

:

Warning

Danger of death!

Children may lock themselves 

in appliances, putting their lives 

at risk.

For appliances that have 

reached the end of their service 

life: 

Disconnect the mains plug.

Cut through the mains cable 

and remove it, along with 

plug.

Destroy the lock on the 

washing machine door.

:

Warning

Risk of suffocation!

Children may become wrapped 

in packaging/film or packing 

parts if allowed to play with 

them, or they may pull them 

over their heads and suffocate. 

Keep packaging, film and 

packaging parts out of the 

reach of children.

:

Warning

Risk of poisoning!

Detergents and care products 

may be poisonous if 

consumed. 

Keep detergents and care 

products out of the reach of 

children.

:

Warning

Eye/skin irritation!

Detergents and care products 

may cause irritation if they 

come into contact with the eyes 

or skin. 

Keep detergents and care 

products out of the reach of 

children.

:

Warning

Risk of injury!

When you wash at high 

temperatures, the glass in the 

washing machine door gets 

hot. 

Do not let children touch the 

hot washing machine door.

Summary of Contents for WM SERIES





































Reviews: