Siemens WK14D541, Instruction Manual And Installation Instructions

Page: 15 / 36

15
Washing programmes*
*depends on the model
Shirts/Business
Non-iron shirts made of cotton, linen, synthetic fibres or blended fabrics.
Gentle spin only, hang up dripping wet.
Night wash
Particularly quiet wash programme with a reduced final spin.
Sleep mode. Once the programme has finished, the display goes out, but
can be reactivated by pressing any button.
Drying programmes
Intensive Dry
Intensive drying for
a
(robust fabrics), at 90°C.
Gentle Dry
Gentle drying for
`
(easy-care fabrics), 60°C.
Special programmes
Fluff Clean
The drum must be empty.
This programme is designed to clean the drying cycle of any fluff
deposits. The washer-dryer uses the flashing symbol
7
(
Fluff removal
cycle
) in the display panel to show that this programme must be run. The
electronic cycle counter is then automatically reset. The
7
(
Fluff removal
cycle
) symbol goes out after the programme starts.
To run the
Fluff Clean
, proceed as follows:

Make sure that the drum is completely empty and close the door.

Set the programme selector to
Fluff Clean
.

Press the
Start/
Pause button.
The
Fluff Clean
programme can also be run at any time without
prompting by the appliance.
Rinse + Spin
:
An additional rinse cycle with a final spin. If the laundry is to be removed
dripping wet, set the Spin speed to
$
(Rinse hold) before Programme
start –> page 16.
Empty + Spin
:
Drain the rinsing water following a programme with
$
(Rinse hold) –> page 16.

Turn the programme selector to
Empty + Spin
.

Set the Spin speed to
$
(Rinse hold).

Press the
Start/
Pause button.
or
Drain
and
spin at the desired spin speed:

Turn the programme selector to
Empty + Spin
.

Press the
Spin rpm
button repeatedly until the desired spin speed is
set.

Press the
Start/
Pause button.
i
i