12
Special programmes
Fluff Clean
?
This programme is executed to clean the drying circuit of any fluff
deposits. The time at which the programme needs to be run is determined
automatically by the washer-dryer and indicated by the
(
Fluff Clean
)
l
symbol on the display panel. The
l
(
Fluff Clean
) symbol remains lit until
the programme has been successfully completed.
To run the
Fluff Clean
l
programme, proceed as follows:
Make sure that the drum is completely empty and close the door.
Set the programme selector to
Fluff Clean
?
.
Press the
!
(Start/Pause) button.
At the end of the programme, the
Fluff Clean
?
symbol goes out.
You can also run the
Fluff Clean
?
programme at any time without
prompting from the appliance.
'
+
B
Rinse + Spin
:
An additional rinse cycle with a final spin. If the laundry is to be removed
dripping wet, set the spin speed to
$
(Rinse stop) before starting the
programme
→
page
13.
t
+
B
Empty + Spin
:
Drain the rinsing water following a programme with
$
(Rinse stop)
→
page
13.
Turn the programme selector to
t
+
B
Empty + Spin
.
Set the spin speed to
$
(Rinse stop).
Press the
!
(
Start
/Pause) button.
or
Drain
and
spin at the desired spin speed:
Turn the programme selector to
t
+
B
Empty + Spin.
Press the
B
(Spin)
button repeatedly until the desired spin speed is
set.
Press the
!
(Start/Pause) button.
i
