Cleaning and servicing
en
51
16.5 Cleaning the drain pump
Clean the drain pump in the event of
faults, e.g. blockages or rattling
noises.
Emptying the drain pump
Note:
Please read the information in
the Safety →
sections
to ensure that you use the appliance
safely.
1.
Turn off the water tap.
2.
Switch off the appliance.
3.
Disconnect the appliance's mains
plug from the power supply.
4.
Remove the base panel.
5.
Slide a sufficiently large receptacle
under the opening.
6.
Take the drain hose out of the
holder.
7.
CAUTION - Risk of scalding!
When you wash at high temperat-
ures, the detergent solution gets
hot.
▶
Do not touch the hot detergent
solution.
To allow the detergent solution to
flow out into the container, remove
the sealing cap.
8.
Firmly press on the sealing cap.