Siemens WG44G2AIDN User Manual And Installation Instructions Download | Manualshive

Page: 33 / 56

background image

Intelligent dosing system

en

33

15 Intelligent dosing sys-

tem

The optimum quantities of liquid de-
tergent and fabric softener are dis-
pensed automatically depending on
the programme and settings.

15.1 Starting the programme

with intelligent dosing
system

If you do not want to dose liquid de-
tergent and fabric softener manually,
use the intelligent dosing system.
This function is available depending
on the selected programme and is
activated automatically.

Note

If you are using the intelligent dosing
system, do not add additional deter-
gent or fabric softener into the com-
partment for manual dosing.
→

"Adding detergent and care

product", Page 31

If you want to dose manually for a set
programme, observe the following
information:

¡

Deactivate the intelligent dosing
system before starting the pro-
gramme. The selected settings are
retained even after the appliance
has been switched off.
→

"Buttons", Page 23

¡

Pour detergent or fabric softener
into the compartment for manual
dosing.
→

"Adding detergent and care

product", Page 31

¡

Activate the intelligent dosing sys-
tem once the programme has
ended.
→

"Buttons", Page 23

Requirements

¡

The laundry is prepared.
→

"Preparing the laundry", Page 29

¡

The laundry is sorted.

¡

The laundry is placed in the appli-
ance.
→

"Loading laundry", Page 31

¡

The programme is set.
→

"Setting a programme", Page 30

¡

The intelligent dosing system is ac-
tivated.
→

"Display", Page 21

"Display", Page 21

1.

Fill the dispensers →

To replace the contents of the dis-
penser with another product, clean
the detergent drawer →

2.

If required, adjust the basic
dosage →

.

3.

If required, adjust the programme
settings →

4.

Start the programme →

.

a

After the programme has ended,
the display shows: "End".

5.

The
→

"Unloading the laundry",

.

15.2 Filling the dispensers

If you want to use the intelligent dos-
ing system or if the appliance dis-
plays an indication during operation
of the appliance, fill the dispensers.

Note:

Fill the dispensers only with

suitable detergent and care products
→

If you want to add more liquid deter-
gent or fabric softener in the dis-
penser, use the same product.
If you want to replace the liquid de-
tergent or fabric softener in the dis-
penser with another product, clean
the detergent drawer beforehand.
→

"Cleaning the detergent drawer",

«
...
31
32
33
34
35
...
»

Summary of Contents for WG44G2AIDN

























































Reviews:

No comments

Related manuals for WG44G2AIDN

Brand: lancer Pages: 50

Brand: lancer Pages: 33

SunJoe iON SPX6000C-XR

Brand: SNOWJOE Pages: 24

Poseidon 5 Series

Brand: Nilfisk-ALTO Pages: 68

Brand: Gaggenau Pages: 28

Brand: Kärcher Pages: 28

Brand: arcelik Pages: 24

Brand: CORBERO Pages: 13

Brand: FAR Pages: 58

Brand: Indesit Pages: 84

Brand: CaterChef Pages: 44

Brand: GE Pages: 28

Brand: Electrolux Pages: 20

Brand: Electrolux Pages: 27

Brand: Electrolux Pages: 36

Brand: Electrolux Pages: 44

Brand: Electrolux Pages: 40

Brand: Electrolux Pages: 42

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands