Figure 4
VSA-1/VSM-1/VLM-1/VFM-1 Wiring Diagram
NOTES:
1. If only VSA-1 modules and no VSM-1, VLM-1, or VFM-1 modules are used in the
system, P2 of the first VSA-1 module is connected directly to TBM-2, P4, using the 3-
foot cable supplied with the TBM-2.
2. The custom annunciator manufacturer should use 12-position female connectors, such
as AMP No. 1-640440-2. Hood for connector is AMP No. 1-640550-2; key for connector
is AMP No. 641994-1. The hood and key are the same as those used for connection to
the MID-16 module. Two keys should be inserted at slots 1 and 12 of the female
connector, leaving 10 slots for connection to the VSA-1 header.
P/N 315-096072-4
