Siemens TI923 Series, Instruction Manual

Page: 23 / 188

Settings
en
23
--------
Starting the "Water filter"or
"frost protection" programme
1.
Briefly press the
$
/
±
button.
2.
The rotary selector can be used to
select the "Water filter" or "frost
protection" programme. The current
setting is marked on the display.
Note:
The rotary selector can also be
used to select a service programme.
~
"Service programmes" on page 27
Water filter
A water filter lessens limescale deposits
and reduces impurities in the water. The
appliance also does not need to be
descaled so often. Water filters are
available from retailers or from
customer service.
~
"Accessories"
on page 11
If a water filter is inserted, the appliance
will show when it needs to be changed.
The display shows the relevant prompt.
Inserting or replacing a water filter
A new water filter must be rinsed before
it can be used.
1.
Select "Water filter" in the Settings
menu.
2.
Use the navigation button to select
"insert" or "replace".
3.
Use the measuring spoon to press
the water filter firmly into the empty
water tank.
4.
Fill the water tank with water up to
the "
max
" marking.
5.
Place a container with a capacity of
at least 1.0 l under the outlet and
confirm.
Water will now flow through the filter.
The filter is rinsed.
6.
Then empty the container.
The appliance is ready for use again.
Factory settings Appliance reset to factory set-
tings
Resets all your own settings to the condition
when delivered.
Demo mode
■
on
■
off
For presentation purposes only. The setting "off"
must be activated for normal operation. The set-
ting is only possible in the first 3 minutes after
switching on the appliance.
Child-proof lock
■
activate
■
Child-proof lock activated
To switch off, press
milk
Setting that governs whether the child-proof
lock is activated or deactivated.
~
"Childproof
lock" on page 21