Siemens TI351509DE, Instruction Manual

Page: 36 / 108

en
Before using for the first time
36
K
Before using for the
first time
Before using for the first time
In this section, you will learn how to
commission your appliance.
Note: Only use the appliance in
frost-free areas. If the appliance was
transported or stored at temperatures
below 0 °C, you must wait for at least
3 hours before using it.
Installing and connecting the
appliance
1.
Remove any protective plastic film.
2.
Place the appliance on a level,
water-resistant surface which can
bear the weight.
3.
Using the mains plug, connect the
appliance to an earthed socket that
has been correctly installed.
Note: After plugging in, always wait
(approx. 5 seconds).
Commissioning the appliance
Attaching milk frother
~
Fig.
#
1.
Remove milk frother parts from the
bag.
2.
Assemble milk frother.
3.
Attach the milk frother on the front of
the appliance.
Filling the bean container
This appliance can be used to make
coffee drinks from coffee beans.
1.
Open the lid
)*
of the bean
container
)2
.
2.
Pour in coffee beans.
3.
Close the lid again.
Notes
■
Coffee beans that have been glazed
or caramelised or that contain other
sugary additives block the brewing
unit. Only use pure bean mixes that
are suitable for use in fully automatic
espresso or coffee machines.
■
The coffee beans are freshly ground
for each brewing process.
■
Keep the coffee beans sealed and
stored in a cool place to maintain
optimum quality.
■
Coffee beans can be stored in the
bean container for a number of days
without losing their aroma.
Filling the water tank
Important:
Fill the water tank with fresh,
cold, still water on a daily basis. Prior to
operation, check whether the water tank
has been sufficiently filled.
1.
Carefully remove the cover of the
water tank.
2.
Use the handle to remove the water
tank and then rinse out.
3.
Fill the water tank with water up to
the "max" marking.
4.
Put the water tank back in the holder
again, keeping it straight, and fit the
cover of the water tank.