Siemens TI 903 Series, Instruction Manual, Page: 21 / 180

Menu settings
en
21
Q
Menu settings
Menu sett ings
This menu is used for changing settings
individually, accessing information and
starting a programme.
Changing settings
1.
Press and hold the
$
/
±
button for at
least 5 seconds to open the "Menu".
The different setting options will
appear in the display.
2.
Make the desired setting using the
rotary selector.
The current setting is highlighted in
colour on the display.
3.
Press the navigation button under
"select".
4.
Use the rotary selector to change the
setting.
5.
Press the navigation button under
"confirm".
The setting has been saved.
6.
Press the
$
/
±
button to exit the
"Menu".
The drink selection appears on the
display.
Notes
■
You can switch to the previous level
by pressing the navigation button
under "back".
■
The setting procedure can be
aborted by pressing the navigation
button under "abort".
■
Press the
$
/
±
button to exit the
menu at any time.
■
If no entry is made within approx. 2
minutes, the menu closes
automatically and the settings are
not saved.
The following settings are available:
Settings Possible settings Explanation
Language Different languages Setting the language to be used for display texts.
Water hardness
■
1 (soft)
■
2 (medium)
■
3 (hard)
■
4 (very hard)
Setting in line with the hardness of the local
water supply.
The preset water hardness is level 4 (very hard).
The water hardness can, for example, be
requested from your local water supplier.
It is important to set the water hardness cor-
rectly, so that the appliance indicates accurately
when the descaling programme should be run.
Switch off after 15 minutes
up to
3 hours
Setting that governs how long the appliance
should wait after the last beverage preparation
before it automatically switches itself off.
The factory setting is 30 minutes.
Brightness display Level 1 up to level 10
Standard setting 7
Setting that governs the brightness of the dis-
play
Beverage info Shows the volume of drinks dispensed since the appliance was commissioned.
For technical reasons, the counter does not represent a precise number of cups.
Factory settings Appliance reset to factory set-
tings
Resets all your own settings to the condition
when delivered.